Datasheet4U Logo Datasheet4U.com

DS3669 - Quad High Current Peripheral Driver

Datasheet Summary

Description

The DS3669 is a non-inverting quad peripheral driver similar to the DS3658 These drivers are designed for those applications where low operating power high breakdown voltage high output current and low output ON voltage are required A unique input circuit combines TTL compatibility with high impedan

Features

  • Y Y Y Y Y Y Y Y Y Y.

📥 Download Datasheet

Datasheet preview – DS3669

Datasheet Details

Part number DS3669
Manufacturer National Semiconductor
File Size 98.07 KB
Description Quad High Current Peripheral Driver
Datasheet download datasheet DS3669 Datasheet
Additional preview pages of the DS3669 datasheet.

📁 Similar Datasheet

  • DS3667 - 3 State Bidirectional Transceiver (National)
  • DS36277 - Dominant Mode Multipoint Transceiver (Texas Instruments)
  • DS3630-945GSE - Mini ITX Main Board Manual (Advansus)
  • DS3647A - Quad Tri-state MOS Memory I/o Register (National Semiconductor Corporation)
  • DS3658 - Quad High Current Peripheral Driver (Texas Instruments)
  • DS3680 - QUAD TELEPHONE RELAY DRIVER (Texas Instruments)
  • DS3690 - Three-Stateable Transmission Gate (Maxim Integrated Products)
  • DS36950 - Quad Differential Bus Transceiver (Texas Instruments)
  • DS36954 - Quad Differential Bus Transceiver (Texas Instruments)
  • DS3695A - Multipoint RS485/RS422 Transceivers (Texas Instruments)
Other Datasheets by National Semiconductor
  • DS3662 - Quad High Speed Trapezoidal Bus Transceiver
  • DS3668 - Quad Fault Protected Peripheral Driver
  • DS36149 - (DS36149 / DS36179) Hex MOS Drivers
  • DS36179 - (DS36149 / DS36179) Hex MOS Drivers
  • DS36276 - FAILSAFE Multipoint Transceiver
  • DS36277 - Dominant Mode Multipoint Transceiver
  • DS3628 - Octal TRI-STATE MOS Drivers
  • DS3630B - Hex CMOS Compatible Buffer

Full PDF Text Transcription

Click to expand full text
DS3669 Quad High Current Peripheral Driver July 1992 DS3669 Quad High Current Peripheral Driver General Description The DS3669 is a non-inverting quad peripheral driver similar to the DS3658 These drivers are designed for those applications where low operating power high breakdown voltage high output current and low output ON voltage are required A unique input circuit combines TTL compatibility with high impedance In fact its extreme low input current allows it to be driven directly by a CMOS device The outputs are capable of sinking 600 mA each and offer a 70V breakdown However for inductive loads the output should be clamped to 35V or less to avoid latch-up during turn off (inductive fly back protection refer AN-213) An onchip clamp diode capable of handling 800 mA is provided at each
Published: |